A crush type grille, characteristics, advantages:
1, simple installation, flexible;
2, applicable to most of the existing pipe and channel, without changing the mechanical seal;
3, resistance to high pressure, up to 0.6MPa;
4, does not need to be cleaned, no need to adjust the packing gland;
5, high flow side bar;
6, increase the flow;
7, reduce the head loss;
8, to guide the particles into the cutting room;
9, double shaft design;
10, than the single shaft shredder to more kinds of solid particles;
11, low speed fault provide more torque and less;
12, the two opposite direction rotation axis causing particles was crushed in the two axis;
13, choose a variety of blade blade design combined, according to the different situation of optional, ensure the best results;
14, motor selection is general motors, submersible motor, dry wet amphibious motor. According to the working condition selection, optimal allocation.
Two, crushing grid applications:
1, installed in the low flow, narrow canals;
2, installed in the sewage pipe;
3, the installation and the pump inlet;
4, mounted on the traditional grille decontamination machine outlet. The machine crushes the items, paper products, wood products, plastic products, rubber products, such as living garbage.
Three, work principle:
1, the entrained solids of sewage through the cutting zone;
2, the particles are cutting after cutting room;
3, water entrainment is chopped fine particles downstream, is not a threat to the downstream equipment. |
